Tips and tricks from our members!
Weaving:
• Easy way to tell direction of the cross is to have the top two ties a different color or leave the bottom groups untied.
• A “U” shaped piece of cardboard can hold the cross separate with a paper clip holding yarns in place. *To eliminate the twist when chaining a warp alternate hands as you chain.
• Or instead of chaining wrap the warp around a stick/dowel like a kite-string. This maintains tension and lessens tangles.
• To help keep track of your warp count when winding the warp place pennies, within easy reach of board or reel, for every 10 ends then as you go along drop off a penny each time you’ve done 10.
• If you have to step away while warping large binder clips hold nicely.
• Don’t pinch yarn while winding; the process of winding the pegs will tension itself. Close your index finger to your thumb and let the yarn glide through the opening formed by them.
• Counting thread should be a different color from rest of ties and should loop over/tie every inch. A double knot first then a slip knot works well for this.
• For multiple warps a paddle works best. It takes a while to learn to use it correctly, but it is worth it. A rigid heddle paddle maintains the cross easily.
• Store guide strings labeled with sizes in a Ziploc bag. Use string which does not stretch. *And a small glass of red wine before warping helps!
Back to Front:
• Use TBTs (tightly bundled ties) to hold firmly.
• Dowels or lease strings hold the cross and maintain tension.
Front to Back:
• Measure from the bottom floor brace at the front of the loom to the back beam. Tie up warp to bottom brace at the measured length. This provides tension. Now at front beam thread a cord through the cross and tape down the cord to the beam. This will free your hands while still maintaining some tension. Use a crisp card, like a throw-away credit card received in mail or a laminated index card cut to size, as a sley hook. Untie the choke ties, pull 1st thread from under cord and shove/sley through the dent. The warp thread wraps itself in a “U” shape around the card as it is pushed through the dent.
• The warp bundle can be tied to the breast beam at the one yard point with a tight tie.
• Or the warp bundle can be wrapped once around the breast beam letting the hanging bundle supply necessary tension.
Sleying/Threading:
• An autodenter works well to avoid skipped dents. They are a bit pricey, but worth it. Available where weaving equipment is sold.
• To keep heddles out of the way while threading use a string with paper/binder clips to pull out of the way.
• Also, twist ties, pipe cleaners/chenille stems, shoelaces, and heavy rubber bands work for most tying purposes.
• James's method of threading 4 threads at a time is a time-saver. Line up 4 heddles in pattern, have 4 threads in hand, pull 1st thread through heddle but leave looped on threading hook, do not remove from the hook and move on to the second thread, stick hook through heddle and pull through again, when all four threads are through the heddles pull all through. This works for right to left or left to right threading. It reads more complicated than it is.
• For slippery threads such as tencel , rayon, and silk, spritz with a little water and they won’t slip out of their knots.
• A pair of reed holders or c-clamps work well to hold the reed away from the loom to comfortably sley at a table. The angle can be adjusted to best suit your needs. This works very well when doing a complicated warp or pattern.
• Lease stick holders which mount to the loom are also like a second pair of hands. Angel Wings, www.purringtonlooms. com . Or they can be easily made with a few power tools.
• To hold tension on warp, place the warp between two lathe strips held together with clamps. Let hang freely.
General:
• When winding/beaming on your warp remember to periodically “pop” your warp. This is a good solid yank.
• Weigh broken warp threads with film canisters or medicine bottles filled with pennies. Or use washers on a big paper clip. And fishing weights also work well.
• For a section of loose droopy warp threads place a dowel across the section in question and weight with milk bottles filled with water or sand.
• Empty yarn cones can be used to weigh a repair thread. Pull the repair thread through the hole in the top of the cone, wind thread on second cone, top with first cone and let it hang freely.
• When treadling walk the pedals on the loom for more comfort. It is easy to rework a draft to reflect the treadle change. The draft may look more complicated but it is easier to weave.
• Masking (painters, drafters) tape marked with an arrow can be positioned on the loom showing which direction you are working.
• A high contrast sewing thread can be placed in your weaving at the beginning of a pattern repeat to aid in keeping place and also, as a checkpoint for the pattern. This thread can be easily pulled out. *Dry Erase boards, of any size, can be used to mark pattern sequences, drafts, etc. They can then be marked to show where you stopped.
• Corrugated cardboard using T-pins can also work for this.
• Divide a pattern into a section, whatever works best for you, then make it a point to weave that section without interruption, even if you have to COUNT OUT LOUD!
• Blow up drafts on a copy machine to make the draft easier to read.
• Post-It notes can be used as place markers and a multitude of other uses.
• A broken warp thread can be treated as a supplementary warp and made into a design feature.
• When needing a particular length for a project, such as a scarf, a string with the desired length or a paper tape (from an adding machine) can be attached to the web at the beginning of the project. These float out of the way when weaving.
• A shedding device for frame looms can be made with a wooden stick the width of the loom and paper clips used as heddles.
• Set a goal, such as one bobbin at a time, or whatever you want, to help you maintain a weaving schedule.
• Also, make it a point to put your hobby first, all else will fall into place.
• Wind a new warp when you see the knots appear at the back of your loom. Then you will be ready to start a new project. project.
• Daylight bulbs help immensely.
• When you don’t have a swift, (because it’s not in the budget, you’re too cheap, or you’re in a hotel room with a new skein that demands to be used immediately), a lampshade works wonderfully well! Loosen, but don’t remove, the finial on the lamp and get to spinning. This works best on wide or heavy based lamps with a fabric shade. The fabric shade helps hold the skein in position. It also works on some wall-mounted lamps.
• The next time you need to use a floating selvage on a weaving project, try this: Wind your floating selvage with your warp and tie it to the warp beam. It can then be weighted as needed. At Sheep to Shawl, a weight was added to the floating selvages on the 4-shaft loom and it worked great. You didn’t have to keep letting out the selvage yarn.
Cleaning a Rusty Reed No Chemicals!
Use old rags that you can throw out when you’re done (the rust won’t come out in the wash). Saturate the rags in white vinegar, wring out and place them along the length of your rusty, nasty reed. Then wrap up the whole thing in plastic and leave it for 24 hours. Remove the plastic and rub the rust off with one of the rags. Now rub the reed with a completely dry cloth and use a hair dryer to completely dry everything. This works like a miracle!
• Easy way to tell direction of the cross is to have the top two ties a different color or leave the bottom groups untied.
• A “U” shaped piece of cardboard can hold the cross separate with a paper clip holding yarns in place. *To eliminate the twist when chaining a warp alternate hands as you chain.
• Or instead of chaining wrap the warp around a stick/dowel like a kite-string. This maintains tension and lessens tangles.
• To help keep track of your warp count when winding the warp place pennies, within easy reach of board or reel, for every 10 ends then as you go along drop off a penny each time you’ve done 10.
• If you have to step away while warping large binder clips hold nicely.
• Don’t pinch yarn while winding; the process of winding the pegs will tension itself. Close your index finger to your thumb and let the yarn glide through the opening formed by them.
• Counting thread should be a different color from rest of ties and should loop over/tie every inch. A double knot first then a slip knot works well for this.
• For multiple warps a paddle works best. It takes a while to learn to use it correctly, but it is worth it. A rigid heddle paddle maintains the cross easily.
• Store guide strings labeled with sizes in a Ziploc bag. Use string which does not stretch. *And a small glass of red wine before warping helps!
Back to Front:
• Use TBTs (tightly bundled ties) to hold firmly.
• Dowels or lease strings hold the cross and maintain tension.
Front to Back:
• Measure from the bottom floor brace at the front of the loom to the back beam. Tie up warp to bottom brace at the measured length. This provides tension. Now at front beam thread a cord through the cross and tape down the cord to the beam. This will free your hands while still maintaining some tension. Use a crisp card, like a throw-away credit card received in mail or a laminated index card cut to size, as a sley hook. Untie the choke ties, pull 1st thread from under cord and shove/sley through the dent. The warp thread wraps itself in a “U” shape around the card as it is pushed through the dent.
• The warp bundle can be tied to the breast beam at the one yard point with a tight tie.
• Or the warp bundle can be wrapped once around the breast beam letting the hanging bundle supply necessary tension.
Sleying/Threading:
• An autodenter works well to avoid skipped dents. They are a bit pricey, but worth it. Available where weaving equipment is sold.
• To keep heddles out of the way while threading use a string with paper/binder clips to pull out of the way.
• Also, twist ties, pipe cleaners/chenille stems, shoelaces, and heavy rubber bands work for most tying purposes.
• James's method of threading 4 threads at a time is a time-saver. Line up 4 heddles in pattern, have 4 threads in hand, pull 1st thread through heddle but leave looped on threading hook, do not remove from the hook and move on to the second thread, stick hook through heddle and pull through again, when all four threads are through the heddles pull all through. This works for right to left or left to right threading. It reads more complicated than it is.
• For slippery threads such as tencel , rayon, and silk, spritz with a little water and they won’t slip out of their knots.
• A pair of reed holders or c-clamps work well to hold the reed away from the loom to comfortably sley at a table. The angle can be adjusted to best suit your needs. This works very well when doing a complicated warp or pattern.
• Lease stick holders which mount to the loom are also like a second pair of hands. Angel Wings, www.purringtonlooms. com . Or they can be easily made with a few power tools.
• To hold tension on warp, place the warp between two lathe strips held together with clamps. Let hang freely.
General:
• When winding/beaming on your warp remember to periodically “pop” your warp. This is a good solid yank.
• Weigh broken warp threads with film canisters or medicine bottles filled with pennies. Or use washers on a big paper clip. And fishing weights also work well.
• For a section of loose droopy warp threads place a dowel across the section in question and weight with milk bottles filled with water or sand.
• Empty yarn cones can be used to weigh a repair thread. Pull the repair thread through the hole in the top of the cone, wind thread on second cone, top with first cone and let it hang freely.
• When treadling walk the pedals on the loom for more comfort. It is easy to rework a draft to reflect the treadle change. The draft may look more complicated but it is easier to weave.
• Masking (painters, drafters) tape marked with an arrow can be positioned on the loom showing which direction you are working.
• A high contrast sewing thread can be placed in your weaving at the beginning of a pattern repeat to aid in keeping place and also, as a checkpoint for the pattern. This thread can be easily pulled out. *Dry Erase boards, of any size, can be used to mark pattern sequences, drafts, etc. They can then be marked to show where you stopped.
• Corrugated cardboard using T-pins can also work for this.
• Divide a pattern into a section, whatever works best for you, then make it a point to weave that section without interruption, even if you have to COUNT OUT LOUD!
• Blow up drafts on a copy machine to make the draft easier to read.
• Post-It notes can be used as place markers and a multitude of other uses.
• A broken warp thread can be treated as a supplementary warp and made into a design feature.
• When needing a particular length for a project, such as a scarf, a string with the desired length or a paper tape (from an adding machine) can be attached to the web at the beginning of the project. These float out of the way when weaving.
• A shedding device for frame looms can be made with a wooden stick the width of the loom and paper clips used as heddles.
• Set a goal, such as one bobbin at a time, or whatever you want, to help you maintain a weaving schedule.
• Also, make it a point to put your hobby first, all else will fall into place.
• Wind a new warp when you see the knots appear at the back of your loom. Then you will be ready to start a new project. project.
• Daylight bulbs help immensely.
• When you don’t have a swift, (because it’s not in the budget, you’re too cheap, or you’re in a hotel room with a new skein that demands to be used immediately), a lampshade works wonderfully well! Loosen, but don’t remove, the finial on the lamp and get to spinning. This works best on wide or heavy based lamps with a fabric shade. The fabric shade helps hold the skein in position. It also works on some wall-mounted lamps.
• The next time you need to use a floating selvage on a weaving project, try this: Wind your floating selvage with your warp and tie it to the warp beam. It can then be weighted as needed. At Sheep to Shawl, a weight was added to the floating selvages on the 4-shaft loom and it worked great. You didn’t have to keep letting out the selvage yarn.
Cleaning a Rusty Reed No Chemicals!
Use old rags that you can throw out when you’re done (the rust won’t come out in the wash). Saturate the rags in white vinegar, wring out and place them along the length of your rusty, nasty reed. Then wrap up the whole thing in plastic and leave it for 24 hours. Remove the plastic and rub the rust off with one of the rags. Now rub the reed with a completely dry cloth and use a hair dryer to completely dry everything. This works like a miracle!